-40%
ZINCOR-AUTO Rust remover theatment converter
ZINCOR-AUTO Rust remover theatment converter
ZINCOR-AUTO Rust remover theatment converter
ZINCOR-AUTO Rust remover theatment converter

ZINCOR-AUTO Rust remover theatment converter

$ 21.11

Availability: 20 in stock
  • Brand: ZINCOR
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Returns Accepted: Returns Accepted
  • Country/Region of Manufacture: Russian Federation
  • Refund will be given as: Money Back
  • Type: Rust Remover

    Description

    YouTube
    Video will open in a new window
    Using the eBay App? Paste link into a browser window:
    [isdntekvideo]
    ZINCOR-AUTO (designed to combat body corrosion)
    Tsinkor-Auto is a special kit for local rust removal and galvanization of the body surface or household appliances by electroplating. Zinc is intended for electrochemical removal of rust, deposition of a protective layer of zinc, electrolyte, or restoration of a protective layer of zinc.
    The kit includes:
    - solution for degreasing and removing rust;
    - solution for applying a protective coating;
    - stainless steel electrode for surface preparation;
    - electrode with a tip made of zinc for applying a protective coating;
    - connecting wire.
    Suitable for processing up to 0.3 square meters of surface - this is a platform measuring 30 cm by 100 cm or “nine” wings. Operating voltage - 6-36 V DC (battery, device to start charging). Solutions in reusable vials, non-volatile. Shelf life - at least 5 years.
    Instructions for use
    Rust removal
    - Before starting work on the damaged area, rusted and cleaned paint was removed with a blade or knife.
    - A wire is connected with a clip in the “positive” battery terminal of the vehicle produced.
    - In the No. 1 electrode in the connector and leave the tip with the swab in the No. 1 solution until it is completely saturated.
    - Apply to the damaged corrosion zone, after waiting from 10 to 60 seconds. Slowly move the electrode over the damaged area until rust is removed.
    - In case of deep corrosion, treat mechanically (with emery paper, metal brush) and another process.
    - After removing the rust of the promoter surface, a maximum of water to provide a mixed solution of 1 with a solution of 2.
    - Disconnect electrode # 1.
    Do not touch the surface to be treated with your fingers. metal is degreased.
    The use of a protective layer of zinc:
    - Insert electrode number 2 into the connector and leave the tip with the swab in solution number 2 until it is completely saturated.
    In order to avoid dark spots on the metal surface for 1-3 minutes, DO NOT STOP THE ELECTRODE ON THE PLACE.
    - At the end of the work, thoroughly rinse the area with water and wipe dry.
    Track Page Views With
    Auctiva's FREE Counter