Permatex Rust Treatment 81773, To Destroy Old Rust And Prevent New Rust

Description

Permatex Rust Treatment
Provides one-step treatment that destroys old rust and prevents new rust. Just brush or spray on. Within minutes, rust is replaced by a durable black polymer coating that may be painted. Excellent protective primer. Specially formulated to be used with body filler and fiberglass. Can be used when temperature is between 50°F and 90°F (10°C and 32°C) and on surfaces which do not exceed 200°F (93°C). Aerosol – Level 2
APPLICATION
Automobile
Suggested Applications: Encapsulates rust on automotive applications; trucks, trailers, storage tanks, pipes, valves, fences, guard rails, bulkheads, overheads, decks, hatch covers (topcoat with appropriate marine paint), agricultural equipment, plows, tractors, and snow removal equipment.
Heavy Duty
Suggested Applications: Destroys rust on all truck applications; trailers, storage tanks, pipes, valves, agricultural equipment, plows, tractors, snow removal equipment, etc.
Marine
Suggested Applications: Destroys rust on trailers, storage tanks, pipes, valves, bulkheads, decks, hatch covers (topcoat with appropriate marine equipment, plows, tractor)
DIRECTIONS:
1. Use gloves to prevent staining of hands.
2. Scrape or wipe off dirt & oil. Sand or wire brush rusted surface.
3. Shake well before using.Pour a small amount of Permatex® Rust Treatment into a separate disposable container. Do not return unused material to bottle, or dip the applicator into the original bottle, as contents may be prematurely activated.
4. Brush or sponge on a thin layer using long thin strokes. Try to contain Rust Treatment to rusted area being treated as product will stain surrounding paint. Remove splatters with detergent and water immediately.
5. A black coating will begin to appea rin 15-30 minutes. Apply a second thin coat within 20 minutes, to produce a uniform color.
6. Allow 24 hours protected from moisture before top coating. Acrylic latex finish paints require a solvent-based primer/sealer before painting. Lacquer/enamel-base paints may be used without a primer.
7. Clean brushes and other tools immediately after use with detergent/water.
8. For Automotive Applications (NOT RECOMMENDED FOR AUTOMOTIVE EXTERIOR SHEETMETAL REPAIRS): Allow an extra 24 hours drying time to allow trapped moisture to evaporate before top coating. For a smooth finish, use sandable primer and sand with 220 grit or finer sandpaper before top coating.
Shipping:
Tracking number will be provided.