KBS Coating 75100 - KBS Cavity Coater - 15.5 Ounce Aerosol

Description

KBS
Cavity Coater 15.5 Ounce Aerosol Spray Can
KBS Part Number 75100
Yogi's Part Number KBS75100
Cavity Coater Overview
Cavity Coater
is a one-step, super-penetrating corrosion inhibiting coating (CIC) for long term protection on all metal surfaces.
Cavity Coater
provides a self healing film which renders over 4000+ hrs salt spray protection (meaning Insane Rust Protection) ...over 4 times the protection of conventional cavity waxes.
Use Cavity Coater with a
KBS Cavity Wand
to give long lasting protection for those hard to reach enclosed cavities such as rocker panels, boxed frames, inside doors & fenders, deck lids, tailgates...and more.
Cavity Coater Features
4000+ Hrs Salt Spray (Insane Rust Protection)
Creeps into Welds & Seams
Wicks & penetrates where primers and topcoats cannot
Water Displacing
Self Healing
Easy Application
Ultra Long Lasting
Multi-Surface Uses
Forms Capillary Action
Lubricating properties
Minimizes parts replacement costs
Enables faster dis-assembly when repairs are needed
Protects against carbon fusion
Resists alkaline solutions, most chemical & acid vapors, road salt, steam, salt water
Cavity Coater Applications
Automotive
: Boxed frames • Rocker panels • Inside doors • Inside car & trailer frame rails • Windshield cowls • trunk lids • Hoods • Inside A-Posts • Inside B-Posts • Inside front & rear fenders & Inside tailgates • Back sides of bumpers • Weld seams (Wicks into welds & seams) • Insulating between unlike metal surfaces • Use wherever a typical cavity wax would be used.
Anti-Seize/Anti-Corrosion
: Nuts, bolts & screws • Shafts • Pipe Fittings • Gaskets • Press assemblies • Valve assemblies • Taps & drills • Pump mountings • Packing glands • Chain drives • Metal fittings • Machinery
Cavity Coater Coverage
15.5oz Aerosol of Cavity Coater will coat 125 sq. ft. @ 1 mil thickness.
Quart of Cavity Coater will coat 200 sq. ft. @ 1 mil thickness.
Gallon of Cavity Coater will coat 800 sq. ft. @ 1 mil thickness.
Cavity Coater Directions
To achieve expert results, please take the time to carefully read and understand the following directions before you begin your restoration project. These directions are meant to be general guidelines only and do not cover every application or environmental situation. If you have remaining questions or concerns, please call us toll-free for technical assistance.
ALWAYS WEAR PROTECTIVE GLOVES AND SAFETY GLASSES. ALWAYS WORK IN A WELL-VENTILATED AREA. Please heed all labeled warning and caution notices on all products.
Description:
Cavity Coater is a one-step, super-penetrating corrosion inhibiting coating (CIC) for long term protection on all metal surfaces. Cavity Coater provides a self healing film which renders over 4000+ hrs salt spray protection...over 4 times the protection of conventional cavity waxes.
Use with a
Cavity
Wand to give long lasting protection in those hard to reach enclosed cavities such as rocker panels, boxed frames, inside doors & fenders, deck lids, tailgates...and more.
Coverage:
15.5oz Aerosol: 125 sq. ft. @ 1 mil thickness.
Quart: 200 sq. ft. @ 1 mil thickness.
Gallon: 800 sq. ft. @ 1 mil thickness.
Surface Preparation:
Cavity Coater requires minimal surface preparation to be effective. Remove any readily accessible loose scaly rust.
CAUTION:
Avoid contact with skin, eyes, and clothing. Wear protective gloves and protective goggles. DO NOT SMOKE. Use only with adequate ventilation during application and drying.
NOTE:
Do not caulk or paint over Cavity Coater. Cavity Coater should be applied AFTER paints/coatings have completely cured.
Aerosol Can Directions:
Shake well before use & occasionally again often during application process. Hold can approximately 8 -12 inches from surface to be coated. Apply a thin, even coat of 1 mil thickness. Cover completely but do not over-saturate. Wait 10 minutes for the coating to wick into the seams and weld joints. Remove any excess coating with a clean rag dampened with KBS Cavity Coater Remover.
NOTE:
Do not caulk or paint on top of Cavity Coater. For additional protection, Cavity Coater can be applied to weld seams after painting, if desired. Remove any excess Cavity Coater as described above.
For hard to reach enclosed cavities, attach a Cavity Wand to the Cavity Coater can & insert the wand into the cavity. Depress nozzle and withdraw from cavity at about one foot per second. Repeat to ensure complete coverage or as needed. Flush residual coating from Cavity Wand by inverting Cavity Coater Aerosol can and spraying for 10 seconds to flush Cavity Wand.
Bulk Can (Quart/Gallon) Directions:
1. Surface should be clean and dry. Shake can well before using.
2. Cavity Coater is applied through a KBS Underseal Gun with a CC Wand attachment or an auto body Schutz applicator type gun with spray wand. Cavity Coater contents may be poured into a clean container pot which fits your applicator gun. Excess coating may be removed with Cavity Coater Remover.
3. Apply a uniform coating to interior surfaces. For optimum protection, a 1 mil dry film is recommended. Varying air pressure and wand speed through cavity area will aid in determining coverage. Typically move a one foot per second.
WARNING
: If product is to be sprayed into enclosed areas such as door panels, the solvents in Cavity Coater may require several hours to escape. During this time, the enclosed area must be kept from heat, sparks, electrical devises, or open flames which could ignite vapors.
Why Buy from Yogi's?
Yogi's, Inc. has been in the business of providing classic car and street rod  parts and accessories for over 40 years.
We have over 20,000 parts in  stock in our Monticello, Iowa warehouse ready to ship the business day you place  your order.
This Item is IN STOCK and will ship the business day you place your order.
This means you get it faster!
This product carries the full manufacturer's warranty.
Shipping
This item ships in the continental USA by ground transport.
We will provide a tracking number when your item ships.
We will combine items to reduce shipping costs when applicable. When purchasing multiple items please use the eBay "Add to Cart” feature so you make just one transaction in order to be eligible for combined shipping.
For international shipping we use the eBay Global Shipping Program only. This program, and multiple items purchased in a single transaction using the cart feature is the only way we can combine international shipping.
Attention California Residents:
WARNING:
This store sells products that may contain chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.