Fork Spring Compressor Tool for Most Current Sport Bikes Road Racers TFSC 01

Description

无标题文档
Fork Spring Compressor Tool for Most Current Sport Bikes Road Racers TFSC 01
1 Pcs Motorcycle Accessories TFSC 01 Fork Spring Compressor Tool for Most Current Sport Bikes and Road Racers-Steel
【Works On】TFSC 01 Fork Spring Compressor Tool is specially designed for Victory Cross Country, Victory CCT, Kawasaki and other sports bikes, road racers and motorcycles with barrel forks. Just tighten the nuts to adjust the length and width of the bolts near the top and top to fit your fork.
【Premium Material】Made of the highest quality stainless steel, high strength, anti-corrosion and rust, impact resistance, strong and durable. High precision and hardness ensure reliable long-term service.
【High Performance】The TFSC 01 Fork Spring Compressor Tool allows the spring to compress when the fork cap is removed from the stem, making it safer to replace the fork seal and oil. Great for anyone who wants to remove the spring, change the fork oil, or use it in other ways.
【A Must Have Tool】The 17.9-inch long fork spring compressor tool supports both horizontal and vertical modes, and the vertical mode is generally used. The tool has a nut on the top to help compress and squeeze the spring, an adjuster near the top that grabs the spring or fork spring spacer, and a pin on the bottom that holds the fork legs in the spring compressor. This tool is essential for repairing road bike forks or for racers looking to replace springs.
【Satisfaction Guarantee】We committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty.
Product Description
Mount the fork leg in the Spring Compressor.
The Pin on the Foot goes into the hole in the bottom of the fork.
Put the pins of the Spring Compressor into the holes and tighten the adjuster screw until both pins are fullycaptured by the hole.
Tighten the Spring Compressor with an electric drill with a socket or a speed handle but make sure you stop before the tool hits the top of the fork tube.
Once the fork is compressed enough, extend the damping rod and remove the Bleeding Tool.
Install the Fork Cap. Make sure the Fork Spring Preload Adjuster is backed out all the way.
Bring the jam nut up against the fork cap.
Back out the adjuster a few clicks to give the Needle clearance from the Seat while you.
Tighten the Jam Nut.
Unscrew the Fork Spring Compressor Tool, remove the fork leg from the tool, and tighten the Cap.
Set all your adjusters, mount the forks on the bike, and enjoy.
Ford Front Crank Wear Sleeve Installer Kit Fit for Powerstroke 6.0L 2003-2010
66.96 USD
OTC522 Large Gear and Pulley Puller Replace Fits Ford D80L-522-A and 303-D025
49.47 USD
Oil Supply Rail End Plug Set 4C3Z-6026-CA for 1994-2003 7.3L Ford Powerstroke
34.99 USD
Crankshaft Front Seal Installer Alt 303-1259 ZTSE4691 Fits Ford 6.4L F-250-550
73.48 USD
Oil Rail Ball Nipple Cup Impact Tool & O-Rings Seal Kit for Ford 6.0L Diesel
42.99 USD
Oil Rail Ball Tube O-Rings Repair Kit+Injector Seal Kit For 2003-2007 Ford 6.0L
79.99 USD
6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool Fits Ford 6.0L Engine
12.48 USD
IPR Valve Air Test Fitting Tool & Regulator Valve Removal Tool Fit for Ford 6.0L
28.96 USD
Inner Axle Seal Installer Fits for Ford Super Duty Dana 50 /60 Axle
66.48 USD
3418 Fuel Injector Removal Tool Fit for 6.7L Ford Powerstroke 2011-2018 F250-550
44.48 USD
17mm 12pt Socket Injector Line Removal Tool Sl11400 Fits Ford Power Stroke 6.7L
39.48 USD
Fuel Injector Socket Set&Injector Removal Tool Fits 6.7L Ford 2011-2018 F250-550
83.48 USD
Fuel Filter Return Line Connector Fitting Fit Ford 2017-2020 Powerstroke 6.7L
29.47 USD
Transmissions Tool Lip Seal Installer Protector Kit Fit Ford AOD AODE 4R70W 4R75
79.96 USD
Power Stroke Front Crankshaft Seal Installer Tool Fits Ford F250-750 Alt ST-137B
319.48 USD
Injector Sleeve Cup/Seat/Bore Cleaning Brush Kit Fit Ford /Caterpillar/ Navistar
20.48 USD
W302193 Rocker Arm Retainer Clip Fit for Ford F250 F350 F450 F550 2003-2010 6.0L
29.48 USD
Fuel Pressure Test Fitting Adapter Fit 6.0L Ford Diesel Engine 2003-2010
15.97 USD
Camshaft Cam Pulley Sprocket Holder Tool For Ford, Dodge, GM, Honda, Mazda,Volvo
32.97 USD
Water Pump Pulley Removal Tool 303-S455 211-185 303-009 Fits for Ford/Mercury
197.99 USD
Differential Cover Gasket Rubber Coated Steel Core fit for Ford 8.8 Axles F880
17.57 USD
Fuel Injector Holding Fixture Tool Fit Ford 2003-2010 6.0L Engines VT365/ VT275
36.63 USD
303-1514 6.7L Rear Crankshaft Seal Installer Tool for Ford F-250/350 /450/550
369.95 USD
4.4123R Energy Suspension Body Mount Bushing Kit Fits Ford F150 F250 F350 Truck
159.85 USD
Polyurethane Body Mount Bushing Set Kit Fit for Ford F150-350 1980-1998 2WD 4WD
124.96 USD
6695 Wheel Knuckle Vacuum Oil Seal Installer Fits Ford 1998-2004 F-250-550
68.97 USD
303-1513 Rear Crankshaft Seal Installer Alt ST-148 Fit for Ford 6.7L Powerstroke
269.96 USD
11001 Deluxe Pinion Depth Gauge Checker Tool Kit For GM Ford Chrysler Dana 30-80
459.99 USD
ST-152 6.7L Front Crankshaft Seal Remover Tool 303-1510 Fits Ford Super F250-750
188.48 USD
TU-15-24 Diesel Compression Test Adapter M14-1.25 Fit Ford/Navistar 6.0L & 6.4L
39.96 USD
Fuel Injector Return Line T Fitting Brass Fuel Line Hose Tee Connector Fits Ford
16.83 USD
Diesel Fuel Banjo Bolt & Washer Kit Ultra High Flow Upgrade Fit Ford 6.0L & 6.4L
24.48 USD
600-249 Locking Hub Service Kit Fits for Ford F250 F350 F450 F550 2005-2018
14.96 USD
Mechanical Fuel Pump Eccentric Kit For SBF Ford 302 289 351W 5.0 BBF 429 385 460
18.96 USD
6697 Wheel Oil Seal Installer Axle Tool Fit Ford 2005 to Current F-250 F-350
76.99 USD
Fuel Injector Sleeve/Cup Puller & Installer Tool Fit Ford Powerstroke 6.0L&6.4L
98.99 USD
Double Clutch Dry DPS6 Transmission Installer Remover Tool 307675 For Ford Volvo
176.99 USD
Timing Chain Locking Wedge Holding Tool Fit Ford Mustang Lincoln Mercury F-150
11.56 USD
FOR 2003-2007 Ford 6.0L Diesel Nipple Cup Socket Repair Kit with O-Rings Socket
33.99 USD
Dry Type Dual Clutch Transmission Oil Seal Removal Tool for Ford Focus Fiesta
98.99 USD
Dry Type Dual Clutch Transmission Oil Seal Removal Tool for Ford Focus Fiesta
98.99 USD
Cylinder Head Repair Kit Fit Ford 6.0L Powerstroke Engine Fuel Injector Sleeve
132.99 USD
Cylinder Head Repair Kit&Fuel Injector Sleeve Tool Fit Ford 6.0/6.4L Powerstroke
245.50 USD
KF04050BK Polyurethane Body Mount Bushing Kit for 1999-17 Ford F250 F350 2WD 4WD
56.40 USD
KF04050BK Body Mount Bushing Kit for 1999-2017 Ford F250/350 2/4WD Polyurethane
68.97 USD
Dry Type Dual Clutch Transmission Oil Seal Removal Tool for Ford Focus Fiesta
98.99 USD
HPOP High Pressure Oil Pump Master Service Kit for 1994-2003 Ford 7.3L Navistar
49.07 USD
74mm 14 Flute Oil Filter Cap Wrench Socket Remover Tool for Dodge Ford Toyota
12.97 USD
303-770 Crankshaft Rear Main Seal & Wear Ring Installer for Ford 4.5L/6.0L/6.4L
98.99 USD
0033 Universal Transmission Front Pump Remover Tool Replace for GM Ford Chrysler
92.99 USD
0033 Heavy Duty Transmission Front Pump Removal Tool Set For GM Ford Chrysler
89.97 USD
303-1248 303-1530 Camshaft Holding Tool Set Fit Ford Mercury 4V Engines 3.5/3.7L
29.99 USD
7834 Rear Crankshaft Seal Installer For Ford Aerostar 93-97 & Ranger Explorer
37.99 USD
Automotive Cam Timing Alignment Tools Kit Fit for Ford Fiesta Focus Volvo Mazda
17.97 USD
Crank Pulley Bolt Crankshaft Tool for Ford Lincoln Mercury Vehicles F5RZ-6A340-B
8.47 USD
High Pressure Fuel Rail Adapters Pressure Oil Rail Leak Test Kit Fit Ford 6.0L
14.96 USD
Air Test Fitting Tool &Oil Rail Adapter Leak Test Kit Fit Ford 6.0L Powerstroke
18.46 USD
High Pressure Oil Pump IPR Valve Air Test Fitting Tool Fit Ford Powerstroke 6.0L
28.86 USD
Cam Phaser Delete Lockout Aluminum Block Fit Ford 4.6L 5.4L 6.8L 3V F250-350-450
16.48 USD
2 PcsTiming Chain Wedge Fixing Tool+ Ford Cam Phaser Locking Kit for Engine
20.97 USD
6599 Fuel Tank Lock Ring Wrench Tool Pump Removal Installer For GM Chrsyler Ford
30.53 USD
RK-25 Repair Kit for Model 25 wall Faucet Repair Kit Fit for Woodford Freezeless
40.99 USD
For 98-04 Ford F250 F350 Excursion Thrust Washer Snap Ring Kit 50 60 Super Duty
12.99 USD
9N12104 Distributor Gasket Set,Compatible with Ford/New Holland Tractor 2N 8N 9N
9.75 USD
Axle Knuckle Tube Dust Seal Snap Ring Kit for Ford Super Duty Excursion F250-550
199.98 USD
77110 Harmonic Balancer Socket 22mm Crank Bolt Socket Fits for Ford Jeep Toyota
29.99 USD
High Pressure Oil System IPR AIR TEST Tool Fit for Ford 6.0L & 7.3L Powerstroke
169.99 USD
Fuel Filter Tank Supply Line Connector Kit Fit Ford 6.7L Powerstroke 2011-2022
45.99 USD
Silicone Body Mount Bushing Kit Fit 08-16 Ford Super Duty F-250 F-350 Crew Cab
349.99 USD
Diesel Fuel Injection Line Clamp Set Fits 1983-1994 Ford 6.9L / 7.3L IDI Engine
39.99 USD
1 Pcs Motorcycle Accessories TFSC 01 Fork Spring Compressor Tool for Most Current Sport Bikes and Road Racers-Steel
【Works On】TFSC 01 Fork Spring Compressor Tool is specially designed for Victory Cross Country, Victory CCT, Kawasaki and other sports bikes, road racers and motorcycles with barrel forks. Just tighten the nuts to adjust the length and width of the bolts near the top and top to fit your fork.
【Premium Material】Made of the highest quality stainless steel, high strength, anti-corrosion and rust, impact resistance, strong and durable. High precision and hardness ensure reliable long-term service.
【High Performance】The TFSC 01 Fork Spring Compressor Tool allows the spring to compress when the fork cap is removed from the stem, making it safer to replace the fork seal and oil. Great for anyone who wants to remove the spring, change the fork oil, or use it in other ways.
【A Must Have Tool】The 17.9-inch long fork spring compressor tool supports both horizontal and vertical modes, and the vertical mode is generally used. The tool has a nut on the top to help compress and squeeze the spring, an adjuster near the top that grabs the spring or fork spring spacer, and a pin on the bottom that holds the fork legs in the spring compressor. This tool is essential for repairing road bike forks or for racers looking to replace springs.
【Satisfaction Guarantee】We committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty.
Product Description
Mount the fork leg in the Spring Compressor.
The Pin on the Foot goes into the hole in the bottom of the fork.
Put the pins of the Spring Compressor into the holes and tighten the adjuster screw until both pins are fullycaptured by the hole.
Tighten the Spring Compressor with an electric drill with a socket or a speed handle but make sure you stop before the tool hits the top of the fork tube.
Once the fork is compressed enough, extend the damping rod and remove the Bleeding Tool.
Install the Fork Cap. Make sure the Fork Spring Preload Adjuster is backed out all the way.
Bring the jam nut up against the fork cap.
Back out the adjuster a few clicks to give the Needle clearance from the Seat while you.
Tighten the Jam Nut.
Unscrew the Fork Spring Compressor Tool, remove the fork leg from the tool, and tighten the Cap.
Set all your adjusters, mount the forks on the bike, and enjoy.