DE Racing SetUp System for No Prep Drag Racing Cars w/12mm Hex DR10 Slash & More

Description

Introducing the new gold standard in accurate radio control car setup, the DE Racing Setup System. Basic features include a smooth flat surface for interface with measurement tools, several interchangeable adapters hubs to facilitate use with almost any model, and two wheel diameters that match those of tires, aiding in setting model ride height. Though some of these "basic" features are somewhat revolutionary themselves, another creates a new benchmark in the field, we call it "roll to set". Designed as the foundation of this system, "roll to set" describes the proper use of our setup wheels and defines what truly makes it different. Simply drop the car from about six inches onto a smooth flat surface, roll the car a few inches forward, and check the results. This process uses the geometry of the car against the grip of the rubber tire to lock the wheels into a proper position for checking camber and toe. Sounds simple, but without this process, measuring wheel alignment can only be close at best on a car in perfect condition. Add more wear and it only gets worse. Only DE Racing's setup system allows you to correct for model wear, resulting in consistent tuning new to old.
Features:
· Smooth flat face to accurately set camber and toe
· Wheel diameters match those of tires for setting ride height
· Unique "roll to set" feature
· Adapter hubs for use on most current and future models
· Small size and rugged build for convenient pit bag transport
· Made in the U.S.A.
This fits any 1/10 Drag Cars with small wheels up front and large slicks in the back with 12mm hex.
You get:
2 DER-SS-SW Front Wheels
2 DER-SS-LW Rear Wheels
4 DER-SS-12L 12mm Hex Adapters