Cloudray HY-T150 T / PLUS 150W 220V CO2 Laser Power Supply

Description

Cloudray HY-T150 T / PLUS 150W 220V CO2 Laser Power Supply
Cloudray 150W 220V CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine HY-T150 T / W Plus Series
150W Power Supply for CO
2
Laser Tubes
Model: HY-T150 220V
Description:
Model: HY-T150 for 100W,120W, 130W,150W Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply
Application:
HY-T150 Laser Power Supply is used for 100W,120W, 130W,150W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber, etc.
150W High Voltage Power Supply Main Features:
Good compatibility: It can be applicable to 100W,120W,130W,150W laser tubes manufactured by different factories.
High output voltage and high output Current: when input AC220V and output current up to 38mA, the Voltage can be up to 50KV.
High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 50KV.
This Power Supply has the “TEST” button which can test output laser manually.
Easy Control
: The start and stop of the laser can be easily controlled by TTL level. And there is a protection switch to test the external water, ventilation, etc.
Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
The power supply has the function of open circuit protection:
Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
HY-T150 Co2 Laser Power Supply Specification:
Input
Input Voltage
AC110V（to be specified when placing order）
AC frequency
47—440HZ
Cold Surge Current
≤30A(AC110 Input)
Current Leakage
≤0.4mA(AC110V Input)
Output
Max Output Voltage
DC 50KV
Max Output Current
DC 38mA
Efficiency
≥90﹪（full load）
Mean Time Between Failure (MTBF)
≥10000H
Response Speed
≤1ms（from the switch Signal is given to the output current up to 90% of the setting current）
Control Interface
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Pressure-proof
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection
can work in open-circuit condition for a short time（Require a good protective earthing and avoid arc between the positive and the machine shell）
Environmental
Operating Temperature：-10~40℃，Relative Humidity (RH)：≤90﹪
Cooling Way
Force-Air Cooling (FAC)
Dimension
L×W×H=325*240*95(mm)
Technical Support:
1. All our item passes the ISO9001 and CE quality certification.
2. We are the manufacturer of the Co2 Laser Power Supply and have a strict quality control system so that we can supply the best quality products with the lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
5. Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and then press the red button TEST to test laser tube out light or not, this method can be simple judgment power supply is working correctly.
High Efficiency, Fast Response, and Strong Adaptability.
Simple Port Control, T TL level signals can control the laser start/stop.
Laser Power Adjustment: input OV to 5V analog signal, can also input PWM signal.
Open Circuit Protection Function: avoid the damage to laser power supply due to laser tube burst.
The power supply T150 is guaranteed for ten months. The T150 Plus guaranteed for sixteen months.
Main Features:
Good compatibility. It can be suitable for laser tubes up to 150W.
Good power stability and strong adaptability, It can prolong the laser tube service life.
Easy to control: the start and stop of the laser can be easily controlled by TTL level.
Output open circuit protection.
TTL signal indication, water through signal indication and laser output indication.
Come with the BUTTON to test output laser manually.
Application: sculpture and cut acrylic, fabric, double color sheet, and rubber, etc.
Packing List
Supply*1PCS
Shipping
Shipping cost:
Shipping cost vary per item. Please see the item details for the exact shipping cost.
Delivery time:
Most items are delivered in 2-4 business days after shipment
Payment
We accept the following payment methods:
Paypal
All major credit cards
Most Cryptocurrency
Please contact us if you have any questions.
Service
60 Day return policy